This morning, I was greeted by a blank screen on my Yaka meter, sending me into panic mode. Despite the initial worry, I knew I had to troubleshoot the issue. My Conlog wireless Yaka meter relies on functional batteries for smooth operation. In the preceding weeks, I had noticed a persistent and distinct sound emanating from the meter, but I hadn’t paid much attention to it. Connecting the dots, I deduced that the blank screen issue was likely due to low battery levels. Consequently, I embarked on the task of replacing the batteries in my Conlog prepaid meter.
Before we get into the step-by-step guide, these are the materials you need:
- Replacement batteries that are compatible with the Conlog prepaid meter model.
- Screwdriver.
READ ALSO: How to Upgrade Your Umeme Yaka Meter
How to Change Conlog Prepaid Meter Batteries
1. Remove the meter from its pocket/cover shell.
2. Inspect the Conlog prepaid meter to locate the battery compartment. Typically, it is at the back of the meter and is secured with screws.
3. Use a screwdriver to carefully remove the screws securing the battery compartment cover. Place the screws in a safe location to avoid losing them.
4. Gently open the battery compartment cover. Inside, you will find the existing batteries. Carefully remove the old batteries from their slots. Pay attention to the polarity and make a mental or written note of the correct orientation to ensure proper replacement.
5. Use a clean cloth or tissue to wipe the battery compartment, removing any dust or debris. A clean environment ensures optimal battery performance.
6. Take the replacement batteries and insert them into the battery compartment, ensuring the correct polarity.
7. Once the new batteries are securely in place, close the battery compartment cover and reattach the screws.
If the batteries are inserted in corrected, the Conlog Yaka meter will be powered on immediately. Hereafter, you will be able to observe the meter’s display showing the available units.