How To Fix Limited Access Wifi Windows 7

Welcome to our comprehensive guide on resolving the “Limited Access” Wi-Fi issue on Windows 7! If you’ve encountered this frustrating problem, you’re in the right place. We understand how crucial a stable internet connection is for your daily tasks and online activities. In this article, we’ll walk you through step-by-step instructions on how to troubleshoot and fix the “Limited Access” Wi-Fi problem on your Windows 7 operating system.

Causes of Limited Access error in Windows 7

These are the popular errors that might lead to the limited access error;

1. Missing updates
2. Incorrect network connection settings
3. Damaged or incompatible drivers
4. Hardware or software problems
5. Incorrect WEP, WPA, or WPA2 security keys or passphrases
6. Boot in Safe Mode with Networking
7. Configure WLAN settings
8. Check router settings
9. Configure the WinHTTP proxy setting to use direct access

How To Fix Limited Access Wifi Windows 7

Straight away if you are getting limited access, you can follow the steps below to fix this problem in Windows 7.

• Go to Control Panel Network > Internet\Network > Sharing Center.
• From the left pane, choose “manage wireless networks,” then delete your network connection.
• After that, choose “adapter properties.”
• Under “This connection uses the following items,” uncheck “AVG network filter driver” and retry connecting to the network. (Yours might read “Hotspot Shield” instead; uncheck this option.) It will work immediately, even without restarting the system.

If that doesn’t work, try these steps:

• Run CMD as an administrator
• Enter netsh winsock reset, then press enter
• Restart your computer

You should also figure out if your office Wi-Fi connection requires an IP address. You can check this by following these steps:

• Open Control Panel > Network and Internet > Network and Sharing Center > Change adapter settings (top right).
• Right-click on Wireless Network Connection > Properties.
• Double-click on IPV4.
• You can either enter the IP address provided by your office ISP or you may remove it if it isn’t required.

1. Use automatic troubleshooting

Use the automated troubleshooter built into Windows 7. The Windows 7 Network and Internet Troubleshooter tests your network for problems and tries to repair any issues found, automatically.

• Right-click Start
• Select Control Panel
• Click View by and choose Large icons

• Click Troubleshooting
• Click Network and Internet
• Click Advanced
• Ensure the Apply repairs automatically box is checked then click next
• Click Troubleshoot my connection to the Internet and follow the instructions to check for problems

2. Reinstall the wireless network adapter driver

This clears registry values and resets configurations so that drivers can be set up properly for access by Windows. You can do this via Device Manager as described below:

• Right-click Start > type Device Manager > launch the tool
• Find Network adapters and click to expand it

• Right-click the name of your wireless network adapter and select Uninstall
• Click OK and wait for the uninstall process to be completed
• Go to Action under Device Manager
• Select Scan for Hardware changes. Your computer will reinstall wireless networks and the network adapter name will reflect in the category.

• 

• Close Device Manager and restart your computer then try connecting to the internet again

3. Update drivers automatically

In order to prevent PC damage by installing the wrong driver versions, we suggest doing it automatically by using Tweakbit’s Driver Updater tool.

Once installed, the program will start scanning your PC for outdated drivers automatically. Driver Updater will check your installed driver versions against its cloud database of the latest versions and recommend proper updates. All you need to do is wait for the scan to complete.

Upon scan completion, you get a report on all problem drivers found on your PC. Review the list and see if you want to update each driver individually or all at once. To update one driver at a time, click the ‘Update driver’ link next to the driver name. Or simply click the ‘Update all’ button at the bottom to automatically install all recommended updates.

.

4. Update wireless network drivers

When you download and install the latest driver for your wireless adapter, it resolves any issues such as when WiFi is showing limited access in Windows 7.

You can either get driver updates from your device’s manufacturer website, or from other sites, or install using Device Manager (but this is when an internet connection is available

Here’s how to use Device Manager to update your wireless network drivers:

• Right-click Start
• Select Device Manager
• Find Network adapters and click to expand it
• Right-click the name of your wireless network adapter and select Update Driver software

  

• Click Search automatically for updated driver software. If one is found, follow the instructions to install it. if not, check the manufacturer’s website.

5. Check and reset the hardware

1. Click Start
2. Select Power and click Shut Down
3. Unplug the power cord from your wireless router/gateway or wireless modem/router
4. Unplug the power cord from your broadband modem
5. Wait five seconds and then plug the power cord back to the wireless router and wait for the lights to come on and reflect the normal internet and computer activity.
6. Turn on your computer and perform a hard set once Windows loads. If it doesn’t connect automatically, click the Network Connection icon on the notification area and select your network.
7. Click Connect

If this doesn’t help when WiFi is showing limited access in Windows 7, try performing a System Restore.

6. Perform a System Restore

• Click Start
• Go to the search field box and type System Restore
• Click Create a restore point
• Enter your administrator account password or grant permissions if prompted to
• In the System Restore dialog box, click System Restore then click Choose a different restore point

• Click Next
• Click a restore point created before you experienced the problem
• Click Next
• Click Finish

To go back to a restore point, do the following:

• Right-click Start
• Select Control Panel
• In the control panel search box, type Recovery
• Select Recovery
• Click Open System Restore

• Click Next
• Choose the restore point related to the problematic program/app, driver or update
• Click Next
• Click Finish

7. Change your wireless environment

You can do the following when Windows WiFi is showing limited access in Windows 7:

• Move your computer and router closer to each other for a stronger signal
• Remove any metal objects near or between the router and computer as these can block connections
• Limit the number of devices using the network simultaneously as performance drops and when many devices are connected

8. Update router firmware

When your firmware is outdated, it can affect performance, and your computer’s security or prevent the router from connecting to the internet. To update the firmware, log in to the configuration menu on your router, and use it to update. Check your router’s user guide for instructions on how to do this. Connect your computer directly to the router using the network cable when performing the firmware update.

9. Boot in Safe Mode with Networking

Safe Mode with Networking starts Windows in safe mode, including the network drivers and services you need to access the internet or other computers on the same network.

Restart your PC and before Windows 7 splash screen appears on your computer’s display, hit F8 to enable Advanced Boot Options.

The Advanced Boot Options screen should now be available. Select ‘Safe Mode with Command Prompt’.

Keep in mind that if you are not fast enough when pressing F8, Windows 7 will boot up normally. In this case, restart your computer and try to press F8 faster.

Once you’re in Safe Mode, run a System File Checker (SFC) scan

How to run an SFC scan

• Click Start
• Go to the search field box and type CMD
• Right-click Command Prompt and select Run as Administrator
• Type sfc/scannow
• Press Enter
• Restart your computer

Do the following to exit Safe Mode:

• Right-click Start
• Select Run
• Type msconfig
• A pop up will open
• Go to the Boot tab

• Deselect or uncheck Safe Boot option box
• Restart your computer

Configure WLAN settings

• Right click Start
• Select Run
• Type services.msc
• Right click WLAN Autoconfig
• Select Properties
• On Startup Type drop down menu, select Automatic

• Click Apply and then OK
• Restart your computer

10. Check router settings

Ensure that your router is set to broadcast its SSID or network name and you are connecting to the correct SSID, using the correct WEP/WPA passkey on both devices. Once you confirm this, use ‘Windows Connect Now or WiFi Protected setup if available on your router. If you’re trying to use WPA or WPA2, ensure the network adapter and your router support this protocol. If you can only connect using WEP, then your hardware needs a firmware upgrade (see solution 7).

11. Configure WinHTTP proxy setting to use direct access

• Click Start
• Search for Command Prompt
• Right-click Command Prompt and select Run as administrator
• Type this command: netsh winhttp show proxy. If it says Direct access (no proxy server), then you already have WinHTTP access.
• Type the commands below:
• netsh winhttp reset proxy
  net stop wuauserv
  net start wuauserv