How to Check Data Balance on MTN MiFi 

How to Check Data Balance on MTN MiFi -ugtechmag.com
MTN MiFi
- Advertisement -

This article shows you a step-by-step guide to enable you to check your data balance on MTN Mifi the easy way. You can choose to use the USSD shortcode or the MiFi web management interface or insert the MiFi Simcard in a mobile device.

- Advertisement -

Contents

Method 1: Use USSD Shortcode to Check MTN MiFi Data Balance

1. Dial *150*1# and press the call button.

2. Select option 4, Check Balance.

3. Then select option 2, Check Other Number.

4. Enter the MIFI number and hit the “SEND” button.

5. The MiFi data balance will appear on the screen.

Note: You can only use this method if the MiFi number is registered in your name or if both lines were registered using the same details.

Read Also: How to Check Airtel MiFi Data Balance

Method 2: Use MiFI web Management interface Check Data Balance on your MTN MiFi 

This is the commonest method that requires you to use MiFI’s web management interface to view your data balance.

1. Connect the MTN MIFI to your computer.

2. Power on the MIFI.

3. Then select the MIFI name under WIFI connections.

4. Launch the preferred browser on your computer.

5. Open the webpage 192.168.1.1 or 192.168.0.1.

6. Next, you will be prompted to enter your MIFI username and password.

7. Enter username as admin.

8. Then key in password “admin”.

9. The MTN Admin page will load.

10. Tap on the home tab and then Manage Accounts.

11. The USSD box will pop up.

12. Dial *131# to view your MIFI data balance.

Read Also: MTN WakaNet Max; How to Check Data Balance

Method 3: Use a Mobile Device to Check MiFi data Balance

If you can use the above-listed methods then you can choose to check data balance the traditional way. Follow the prompts as listed below;

1. Turn off the MiFi.

2. Open the back cover and remove the MTN sim card.

3. Insert the sim card into any phone.

4. After the network has connected successfully, dial *131# and press the Okay button.

5. Your data balance will pop up on the screen.